TEAC TN-180BT-A3 Bluetooth Wireless Turntable

Category: Tag:


Featuring Bluetooth® capability, the TN-180BT-A3 is the easiest way to enjoy vinyl.

Chair in front of record collection


The TN-180BT-A3 brings you a totally new way of listening to vinyl records with its Bluetooth® capability. No extra cost for hi-fi components or complicated wiring is required. Only Bluetooth® speakers or headphones you might have for smartphones/tablets are required to enjoy the world of vinyl records.

Designed for music enthusiasts, the belt-drive motor ensures a clearer sound than direct-drive DJ players, while selectable outputs, Phono, Line or Bluetooth allow you to connect any type of amplifiers, powered speakers or Bluetooth devices.

Unlike many budget turntables, the TN-180BT-A3 employs a single wooden board cabinet with high-density MDF to dampen vibrations and provide clearer and richer sound, while 3-speed and auto-return turntable mechanism.

For music lovers who have been collecting vinyl records for decades or those just starting out, TEAC’s TN-180BT-A3 delivers the true sound of vinyl records. Available in cherry, black and white finish.

TN 180 BT Bluetooth LED


The TN-180BT-A3 delivers the sound wirelessly via a built-in Bluetooth® transmitter, in addition to conventional RCA output in analog Line or Phono format. The pairing button is located at the tone-arm base, which illuminates when the connection with BT speakers or the headphones is made successfully.

If you already have a Bluetooth-enabled speaker or headphones for your iPhone/Android phone, all you have to do is to install the TN-180BT-A3 in your room – no pricy hi-fi system and complicated wiring are required –. The connection is as simple as ABC, just press the BT pairing button when the Bluetooth® speakers/headphones are ready for the pairing, and once the connection is established, you don’t need to repeat the same process every time you listening to vinyl records.
The TN-180BT-A3 also provides conventional ways of connecting to your hi-fi system with or without the PHONO input via cable or an RCA audio cable.

TN 180 BT B Angled dl 1280


The TN-180BT-A3 plays LP, EP, and SP records from your library. The tone-arm automatically returns to the original position when playback is done.

*The groove of the SP (78rpm) records is 3 to 4 times wider than the typical 33 1/3rpm records, so it might damage the stylus and cause the noise when you play back the record with the pre-installed stylus. Please keep it limited use.

TN 180 BT Cartridge


A VM-type (equivalent to MM-type) cartridge AT3600L by Audio-Technica is already installed to the straight-type tone-arm at the factory, so you can start playing records as soon as you open the box.

The authentic belt-drive turntable is driven by a high torque DC motor, while a precision stainless steel spindle and durable brass spindle holder maintain accurate rotation speed.

TN 180 BT Cabinet Closeup


Unlike others with plastic chassis, a single wooden board with high-density MDF minimizes vibrations and resonance to playback of your vinyl record library with clearer sound.

TN 180 BT Connectors


Enjoy vinyl playback with any amplifier regardless type of inputs. The TN-180BT-A3 supports both PHONO and LINE outputs that allow you to play vinyl with or without Phono equalizer.

Spec description

Turntable section
Motor DC Motor
Speed 33 1/3 RPM, 45 RPM, 78 RPM
Wow and Flutter 0.25%
Signal-to-Noise Ratio 64dB or higher (A-weighted, 20kHz LPF)
Platter Plastic
Diameter of Platter 12″, 30cm
Tonearm section
Type Static Balance, Straight
Effective Arm Length 7.9″, 200mm
Stylus Pressure Range 0 to 5g
Cartridge section
Type VM-type
Output Voltage 3.5mV (1 kHz, 5 cm/s)
Stylus Replacement audio-technica ATN3600L
Analog Output section
Connectors RCA Pin x 1 pair (Chrome-plated)
Output Voltage
PHONO 2.4mV (±3dB)
LINE 149mV (–16.5dBV)
Bluetooth® section
Range Approx. 30ft. / 10 meters
Supported Codec SBC
Power AC 100 to 240V, 50/60Hz
Power Consumption < 1.5W (< 0.2W at Standby)
Overall Dimensions
(W x H x D)
16.5″ x 4.1″ x 14.0″
420 x 105 x 356 mm
Weight Approx. 10.8 lbs. 4.9 kg
Accessories Rubber Sheet, EP Adapter, Dust Cover, Rubber Feet fro Dust Cover x2, Hinge x2, RCA Audio Cable, AC Adapter (GPE053A-120050-Z), Owner’s Manual (including Warranty Card)


There are no reviews yet.

Be the first to review “TEAC TN-180BT-A3 Bluetooth Wireless Turntable”

Your email address will not be published. Required fields are marked *